Digital Acoustics ESBx-110 Especificaciones descargar pdf (Pagina 372)

IEEE 802.3 Ethernet Communication

ADDvantage-32 PLUS

8-16

Be aware that some Switches do not have an administrative account or may use a different User

Name and Password than above. See your Switch manual for specific technical information. If

the User Name and Password are changed from their factory default, Avtron recommends

using:

User Name: avtron

Password: 64183

Once logged in via the provided serial cable, an IP address can be assigned to the Switch such

that the Web-based configuration can be utilized. Many Switch manufacturers allow creation of

separate user accounts with different privilege levels. In general, the default Switch

configuration settings are used. The 'admin' will usually always get you in. After the initial

setup of Switch IP Address via the serial cable, the Switch can be accessed by typing the IP

Address as the URL in Internet Explorer.

Switch ports labeled with an X are internally crossed over. When connecting two devices, a

straight through cable is used if only one device has an X. If both or neither device have an X, a

Crossover cable is required. Your computer network port is not internally crossed over. Straight

through CAT5 cables are used to connect your ADDAPT computer, X-link, PLC, HMI

Operator Displays, Performance View, etc., to a Switch, but not to each other. Crossover cables

are used to connect your computer directly to a PLC, Xlink, or even another computer or to

connect two or more Switches together. Two Switches should be connected by Fiber Optic

cable and simply swap connections at one end. This generally requires popping the halves of

one end out of a clip, swapping, and reattaching the clip.

Ethernet Switches can be provided with a combination of both 100 MHz base Fiber Optic and

10/100 MHz UTP Copper ports with the following specifications:

100baseTX, CAT5 cable, RJ45 connector (RJ21 for mini) max length 100m

100baseFX, fiber optic, 2km full duplex (multimode cable 412m half duplex,

singlemode 10km+)

For Switches that provide diagnostics using a web browser, start Internet Explorer from

Windows using the ADDAPT or PLC computer on the network. Type the Switch’s IP Address

on the Address Line. Enter User Name and Password if required for access to the Switch

Diagnostics. You may want to create a shortcut on your desktop for faster future access to the

Switch’s Diagnostics.

8.6 PLC’s AND ADDAPT 2000 VIA ETHERNET COMMUNICATION

8.6.1 PLC’s

The Avtron ADDvantage-32 PLUS is a high performance and highly configurable digital drive

with resident capability to perform drive control functions locally utilizing a PLC for operator

interface, process I/O, and permissive logic. The PLC is not burdened with time critical and

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 465 466

Sin comentarios

Digital Acoustics ESBx-110 Especificaciones Pagina 372